11030016
Extraction Tool for Flat Blade, 3.96mm KK, 2.00mm, 3.96mm EdgeMate, and Ultra-Fit Terminals
Extraction Tool for Flat Blade, 3.96mm KK, 2.00mm, 3.96mm EdgeMate, and Ultra-Fit Terminals
| 深圳仓库 | 中山仓库 | 可用库存 | 起订参考 | 标准包装（按倍数购） | 交期 |
|---|---|---|---|---|---|
| 0Pcs | 0Pcs | 0 | 0 | 0 | 无货 · 货期请询价 |
- 品类
- Products / Application Tooling / Crimp Presses and Crimp Hand Tools
- 系列
- Crimp Presses and Crimp Hand Tools
- 间距
- -
- Pin
- 0
- 公母
- -
- 额定电流
- -
- 包装形态
- -
- 原厂状态
- Active
库存明细
暂无可用库存
| 数量 ≥ | 单价（未税） | 含税约（13%） |
|---|---|---|
| 1 | ¥0.00 | ¥0.00 |
含税价为未税单价 × 1.13 的约估值，最终以下单支付单金额为准。
¥0.00未税/pc
包装待确认 · 走询价
产物环境合规7 项
| EU ELV | Not Relevant |
| EU RoHS | Compliant per EU 2015/863 |
| GADSL/IMDS | Not Relevant |
| REACH SVHC | Not Contained per D(2025)4165-DC (25 June 2025) |
| Prop65 | Not Reviewed per California Proposition 65 |
| Low-Halogen Status | Not Relevant |
| China RoHS | Not Relevant |
物料主数据23 项
| productDescription | HTA2174 EJECTOR TOOL |
| samples | False |
| productNumberSap | 0011030016 |
| countryOfOrigin | GB,US |
| productManagerGlobal | Andy Smith |
| salesStatusCode | AC |
| materialCreateDate | 1995-12-13 |
| productFamilyCode | EX |
| productLine | 14 |
| productManagerGlobalCode | 2BQ |
| divisionText | Consumer&Commercial |
| labOffice | CCS |
| labOfficeName | Consumer and Commercial |
| salesStatusDescription | Std Product - Ctld S |
| flaggedForDeletion | No |
| productStatus | Active |
| productNumberHyphen | 11-03-0016 |
| engineeringNumber | HTA2174 |
| materialType | FERT |
| productNumberDisplay | 11030016 |
| salesOrgText | 3100:“Tariff Impacted” |
| promotable | True |
| division | 20 |
一般信息13 项
| toolType | Extraction Hand Tool |
| comments | See Tooling Specification (PDF) Above |
| taxonomyPathValues | Products>Application Tooling>Crimp Presses and Crimp Hand Tools |
| function | Extraction |
| moreDetailedTechInformation | toolingsupport@molex.com |
| taxonomyPathIds | products>application-tooling>crimp-presses-and-crimp-hand-tools |
| warrantyDisclaimer | CAUTION: Molex tooling crimp specifications are valid only when used with Molex terminals and tooling manufactured by Molex and sold by Molex or authorized distributors ("Molex Tooling"). When using tooling other than Molex Tooling with Molex specific connector systems listed in our ATS documents, the Molex tooling qualification does not apply and the responsibility for full qualification of the connector system is that of the customer. Molex accepts no liability for connector performance or t |
| isPublished | True |
| upc | 800753619951 |
| geographicArea | Global |
| levelOfAutomation | Manual |
| productName | Flat Blade,KK,KK 396,MarKK,Mini-Lock,Trifurcon,Ultra-Fit |
| webDescription | Extraction Tool for Flat Blade, 3.96mm KK, 2.00mm, 3.96mm EdgeMate, and Ultra-Fit Terminals |
来源：原厂官网规格库（经 ERP 同步）