11405442
Conductor Punch
Conductor Punch
| 深圳仓库 | 中山仓库 | 可用库存 | 起订参考 | 标准包装（按倍数购） | 交期 |
|---|---|---|---|---|---|
| 0Pcs | 0Pcs | 0 | 0 | 0 | 无货 · 货期请询价 |
- 品类
- Products / Application Tooling / Applicators and Crimp Modules
- 系列
- Crimp Hand Tools
- 间距
- -
- Pin
- 0
- 公母
- -
- 额定电流
- -
- 包装形态
- -
- 原厂状态
- Active
库存明细
暂无可用库存
| 数量 ≥ | 单价（未税） | 含税约（13%） |
|---|---|---|
| 1 | ¥0.00 | ¥0.00 |
含税价为未税单价 × 1.13 的约估值，最终以下单支付单金额为准。
¥0.00未税/pc
包装待确认 · 走询价
产物环境合规7 项
| Low-Halogen Status | Not Relevant |
| REACH SVHC | Not Contained per D(2023)8585-DC (23 Jan 2024) |
| GADSL/IMDS | Not Relevant |
| EU ELV | Not Relevant |
| EU RoHS | Compliant per EU 2015/863 |
| Prop65 | Compliant per California Proposition 65 |
| China RoHS | Not Relevant |
物料主数据22 项
| materialCreateDate | 1998-08-06 |
| labOffice | CCS |
| productDescription | 8347B106 CONDUCTOR PUNCH |
| materialType | FERT |
| flaggedForDeletion | No |
| division | 20 |
| engineeringNumber | 8347B106 |
| salesStatusDescription | Non-Std Product |
| productManagerGlobal | Maria Schierscher |
| productStatus | Active |
| countryOfOrigin | US |
| productNumberDisplay | 11405442 |
| productFamilyCode | D3 |
| productLine | 14 |
| productManagerGlobalCode | 2BQ |
| promotable | False |
| labOfficeName | Consumer and Commercial |
| divisionText | Consumer&Commercial |
| salesStatusCode | A2 |
| samples | False |
| productNumberSap | 0011405442 |
| productNumberHyphen | 11-40-5442 |
一般信息12 项
| geographicArea | Global |
| toolType | Applicator |
| upc | 800754991667 |
| comments | See Tooling Specification (PDF) Above |
| taxonomyPathIds | products>application-tooling>applicators-and-crimp-modules |
| moreDetailedTechInformation | toolingsupport@molex.com |
| taxonomyPathValues | Products>Application Tooling>Applicators and Crimp Modules |
| warrantyDisclaimer | CAUTION: Molex tooling crimp specifications are valid only when used with Molex terminals and tooling manufactured by Molex and sold by Molex or authorized distributors ("Molex Tooling"). When using tooling other than Molex Tooling with Molex specific connector systems listed in our ATS documents, the Molex tooling qualification does not apply and the responsibility for full qualification of the connector system is that of the customer. Molex accepts no liability for connector performance or t |
| isPublished | True |
| levelOfAutomation | Semi-Automatic |
| webDescription | Conductor Punch |
| function | Cutter |
来源：原厂官网规格库（经 ERP 同步）